FINALLY OFFLINE

Yamaashi Selvedge Goes Into Rick Owens' Bolan Cutoffs

Rick Owens FW26 Tower look with Bolan cutoffs in 16oz Japanese selvedge denim
Published 4 hours after the Rick Owens signal was detected.
Rick Owens is #222 on the FO Pulse (2026-11-15 close), up 8 from the previous close.

Rick Owens' FW26 Tower Bolan cutoffs are made from heavyweight 16oz selvedge denim woven in Ibara City, Okayama Prefecture by Yamaashi Orimono, founded in 1945, on vintage Sakamoto shuttle looms. The look, worn by ABDE, adds FW26 Tower Low sneakers and a two piece mac made entirely in Japan from leather tanned in Himeji, Hyōgo and sewn in Atsugi, Kanagawa.

Key Points

Rick Owens took 16oz selvedge denim, woven slowly on old shuttle looms in Ibara City, and cut it off at the knee. The Rick Owens Bolan cutoffs from FW26 Tower are made from heavyweight Japanese selvedge by Yamaashi Orimono, a mill founded in 1945, and that's a lot of loom time to spend on a pair of shorts in a winter collection.

The look is worn by ABDE, one of the names Rick puts in front of each release. With the cutoffs come the FW26 Tower Low sneakers and a two piece mac made entirely in Japan, from leather tanned in Himeji, Hyōgo Prefecture and sewn in Atsugi, Kanagawa Prefecture.

Three places, one outfit. Rick wants you to know every one of them.

Yamaashi Orimono Weaves on Sakamoto Looms

Yamaashi Orimono is a weaver in Ibara, Okayama Prefecture, and it weaves this denim on vintage Sakamoto shuttle looms. A shuttle loom throws the weft back and forth across a narrow width, which is how you get the clean self finished edge called selvedge, and it's far slower than the projectile and rapier looms most of the world's denim runs on.

Old shuttle looms need people who know how to keep them going, and Okayama's mills are short on them. Bloomberg reported in 2025 that Kojima's denim mills are struggling to replace a dwindling pool of master weavers as the older ones retire.

Rick has bought from this mill before, for the DRKSHDW Made in Japan line, where retailers have described a 16oz heavyweight from the same weaver on FW25 jeans and a mediumweight 12oz on others.

Ibara has the history to back the name. When American denim came back into Japan after the Second World War, the town's weavers already had the basic skills to make it.

Bolan Cutoffs Are Rick's Knee Length Jean

The Bolan is a Rick Owens cut that shows up as bootcut jeans and as cutoffs, and the cutoff version ends in a raw, knee length hem. The Bolan cutoffs sit high on the waist with a slim leg, darts at the inner thigh and pressed creases down the front.

Put 16oz on that pattern and it changes. Heavyweight denim stands away from the leg instead of falling against it, so a short that might look loose in twill holds a hard, square line in this fabric. The raw hem will soften and fray with wear. The darts keep the shape from turning into a tube.

Here's the take. The cutoffs are the best place in the whole look for this denim. A full length jean in 16oz selvedge is what denim heads expect. A pair of shorts cut from it, shown in November, says the fabric's the point and the season isn't.

Himeji Leather and Atsugi Sewing Make the Mac

The two piece mac is leather from start to finish in Japan. It's tanned in Himeji, a city in Hyōgo Prefecture with a leather trade that local makers trace back more than a thousand years along the Ichikawa River, and sewn in Atsugi, in Kanagawa Prefecture south west of Tokyo.

Atsugi isn't new for Rick. In April, his Suicide band collaboration used 1.5mm heavyweight leather tanned in Tatsuno and sewn in Atsugi, so one Kanagawa city now sews two very different jackets for him in one year. Tatsuno and Himeji are neighbors in Hyōgo, too, which puts the tanning for both jackets in one prefecture.

The Tower Low sneakers sit under all of it. Retailers list them as a low top with a cap toe in black, gray, brown and taupe, with the brown version made from LWG certified grained sheepskin.

Tower Puts the Supply Chain Up Front

FW26 is called Tower, after a prayer line Owens took for the show, "Temple of love, tower of light." The runway in Paris in January leaned on Kevlar, long gray carcoats and executioner style hoods made from tassels, and Rick has been releasing it piece by piece ever since.

What's changed is how much he tells you. In July the Tower drop sold the Jumbo Worker jacket in 13oz megacrust Japanese denim, finished with cracking wax and foil. In October the runway Dracucollar came with its own story, 8mm felt handmade in a small atelier in Bikaner, Rajasthan, from raw Himalayan wool. Now the Bolan cutoffs name the mill, the city, the founding year and the loom maker.

It reads like a care label written by someone who loves the factories. Rick's next big release is a collaboration, with adidas and Rick Owens landing November 17, and those pieces will come from a sportswear giant's supply chain. This week's look is the opposite of that.

Those Sakamoto looms in Ibara are still running, and Rick put the cloth they make into a pair of shorts for winter.

Frequently Asked Questions

What denim are the Rick Owens FW26 Bolan cutoffs made from?

Heavyweight 16oz selvedge denim woven in Ibara City, Okayama Prefecture by Yamaashi Orimono, a mill founded in 1945, on vintage Sakamoto shuttle looms.

Where is the Rick Owens FW26 two piece leather mac made?

It is made entirely in Japan, from leather tanned in Himeji, Hyōgo Prefecture and sewn in Atsugi, Kanagawa Prefecture.

Who is Yamaashi Orimono?

Yamaashi Orimono is a denim weaver in Ibara, Okayama Prefecture, founded in 1945, that weaves selvedge on vintage Sakamoto shuttle looms. Rick Owens has also used its denim for DRKSHDW Made in Japan jeans.

Topics: bolan-cutoffs, fw26-tower, tower-low-sneaks, japanese-leather, japanese-denim, selvedge-denim, rick-owens, atsugi, yamaashi-orimono, rick owens, okayama

More in fashion